Product highlights:
200 watts x 2 channels into 2, 4, or 8 ohms
total harmonic distortion: 0.005% at 20-20,000 Hz
frequency response: 10-100,000 Hz (+0, -3dB)
signal-to-noise ratio: 95dB (line level), 82dB (phono MM) 80dB (phono MC), 113dB (power amp)
wide-band damping factor: greater than 40
DA1 Digital Audio Module can be replaced by future modules to update receiver with the latest digital audio technologies
module is equipped with an 8-channel, 32-bit/192kHz Quad Balanced DAC
AM/FM tuner with 20 presets per radio band
built-in High Drive headphone amplifier
large power transformer with multiple filter capacitors and regulated power supply ensures stable, noise-free operation
patented McIntosh output Autoformers ensure every connected speaker receives full power regardless of its impedance
patented McIntosh Power Guard circuit prevents amplifier clipping to protect speakers
Sentry Monitor and Thermal Protection circuits provide long amplifier operating life and protection against overheating
Home Theater Pass Through mode allows receiver's amplifier to become part of a multichannel sound system
fiber optic illuminated glass front panel for a beautiful appearance and long-term durability
adjustable front-panel display brightness settings
illuminated power meters (with illumination on/off settings)
handcrafted at McIntosh's Binghamton, New York factory
Inputs:
digital audio inputs on DA1 module:
USB (Type B) input for connection to a computer
supports high-res PCM files up to 32-bit/284kHz, DSD files up to 11.2 MHz, and DXD files
2 optical and 2 coaxial inputs
supported bit depth and sample rates: up to 24-bit/192kHz
proprietary "MCT" input for connecting compatible McIntosh components like a McIntosh MCT450 stereo/SACD/CD transport
analog audio inputs:
1 set of balanced stereo XLR inputs
5 stereo RCA audio inputs
separate RCA phono inputs for moving magnet (MM) and moving coil (MC) cartridges
adjustable input impedance loading for optimum sonic performance with a range of MC cartridges (50-, 100-, 200-, 400-, and 1000-ohm settings)
Outputs:
custom McIntosh gold-plated binding-post speaker connectors with 2-ohm, 4-ohm, and 8-ohm output taps to match speaker impedance
full-size headphone output (100-600 ohms recommended impedance)
RCA preamp out/power amp input jacks
Other Info and Specs:
bass and treble controls with tone control circuitry bypass settings for each individual input source
Power Control output provides convenient turn-on/off of McIntosh source components
6 Data Ports provide remote control of connected McIntosh source components
RS-232 input for use with external controllers
IR in and 12-volt triggers
remote
17-1/2"W x 7-5/8"H x 22"D
weight: 75 lbs.
If connecting to a TV, please make sure you can select "PCM" output in your TV's audio menu. The included DAC cannot decode multi-channel Dolby® Digital signals.
warranty: 3 years
